14
EN
GL
IS
H
6. Preparations
1. Place the log cutter on a flat and stable work surface with a good working height.
Arrange good lighting.
2. Set desired cutting length.
3. Connect the electrical cable to the socket, preferably via the circuit breaker,
remember to arrange the cable so that it can not get damaged when working with
the log cutter.
7. Begin working with the log cutter
1. Start the motor with the green start button and allow it to reach full speed.
2. Put the tree trunk in the cradle so that it is stable.
3. Push cradle against the blade in an even movement.
8. Emergency stop
• The lid on the circuit breaker is used as an emergency stop, always fold back
the lid on the circuit breaker when the cutter is in use, so that you can quickly stop
the log cutter when necessary!
• The log cutter has an overload protector which stops the motor when it is
overloaded, allow the motor to cool when it has stopped running. Then press
the little button on the side of the circuit breaker cover to reset the overload
protector!
Summary of Contents for 18-3025
Page 2: ...2...
