ASSEMBLE THE COMPONENTS
2
NOTE:
• lt is good practice to drill clearance and pilot holes before installing
screws in narrow boards or near the end of a board.
Doing so makes it easier to align and assemble the joint, increasing its strength,
and reducing the chance of splitting the wood.
1.1 Connect the Legs (1) to the Front Rail (2) and the Rear Rails (3) as shown.
1.2 All connections are made with 3" Deck Screws.
• Connect the Legs (1) to the Side Rails (4) with 3" Deck Screws as shown.
STEP 1.
FRONT AND REAR FRAME ASSEMBLY
STEP 2.
SIDE FRAME ASSEMBLIES
3
3” Deck Screws - 12
3” Deck Screws - 16