7
ASSEMBLY / OPERATING INSTRUCTIONS
To attach Top Front & Rear Panels continued...
3
Insert 2 x Dowels into each end of the Rear
Panel.
Attach the Top Rear Panel by aligning the
dowels with the dowel holes.
Push together and secure with one 65mm
bolt.
3a.
3b.
3c.
To attach Lower Plinth Panels...
1
2
Insert 2 x Dowels into each end of the Plinth
Panel.
With the change centre still lying on its side
attach a Lower Plinth Panel by aligning the
dowels with the dowel holes.
Push together and secure with one 50mm
bolt.
Repeat for the opposite side.
1a.
1b.
1c.
2a.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
WARNING
PLEASE NOTE!
Make sure that the grooves in both above plinth panels
all face inwards to allow for the fitting of the bottom shelf.
