6
ASSEMBLY CONTENTS / ASSEMBLY / OPERATING INSTRUCTIONS
Assembly Kit continued:
65mm Bolt
x 4
x 4
50mm Bolt
x 1
x 1
Allen Key
Phillips Screwdriver
(Not Included)
To attach Top Front & Rear Panels...
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the change centre is
assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the change centre is not scratched during assembly.
a.
b.
c.
d.
1
2
Lay the Right Side Panel down on its side.
Insert 2 x Dowels into each end of the Top
Front Panel.
Attach the Top Front Panel by aligning the
dowels with the dowel holes with the shelf
groove facing inwards.
Push together and secure with one 65mm
bolt.
When attaching the Top Rear Panel, please ensure
that the shelf groove sits above the screw hole.
1a.
1b.
1c.
1d.
2a.
PLEASE NOTE!
Make sure that the grooves in both above panels all face
inwards to allow for the fitting of the top shelf.
