CNET CSH-24X2G, User Manual

Page: 14 / 26

14
VLAN Member Setup [ Display Mode ]
--------------------------------------------------------------------------------
VLAN | Port Base VLAN |VLAN| Port (VLAN member)
Entry| or | ID |0|0|0|0|0|0|0|0|0|1|1|1|1|1|1|1|1|1|1|2|2|2|2|2|2|2
No. | 802.1Q VLAN | |1|2|3|4|5|6|7|8|9|0|1|2|3|4|5|6|7|8|9|0|1|2|3|4|5|6
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
-----+-----------------+----+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Function Key
[I/M/J/L]Up/Down/Left/Right [1/2]PageUp/PageDown [0]Return [F]Refresh [S]Save
[E]Edit Mode [Enter]Update VLAN [A]Add VLAN [D]Del VLAN [Space]Toggle/Edit State
<E> to execute VLAN entry configure, <Enter> to update VLAN table!!
4.4 QoS Configuration
4.4.1 TOS/Diff Serv. Priority
When TCP/IP’s TOS/DiffServ (DS) based priority is applied, the Switch recognizes TCP/IP
Differentiated Services Code point (DSCP) priority information from the DS-field.
4.4.2 802.1p Priority
When 802.1p tag priority is applied, the Switch recognizes 802.1Q VLAN tagged packets and
extracts the 3-bit User Priority information from the VLAN tag.
4.4.3 Adapted Flow Control
The Switch can automatically turn off 802.3x Flow-control and Back-pressure Flow-control for 1~2
seconds whenever the port receives a high priority packet. Flow-control is re-enabled when no
priority packets are received for 1~2 seconds.