Introduction
1 - 3
Components and Features
One Port Print server
˙
1 Bi-direction parallel port (IEEE 1284)
˙
Fast Ethernet network port: RJ-45 for 10Base-T or
100Base-TX
˙
POST (Power On Self Test)
˙
2 LEDs on backside of indicate status and flow/link lights
˙
2 setup diskette or 1 CD for Netware, Windows
95/98/Me/NT/2000/XP
˙
1 external AC power adapter
˙
1 user’s manual
Hardware Requirements
IEEE 802.3
Ethernet
10Base-T
Four pairs of unshielded
twisted-pair 3,4 or 5 cable
with RJ-45 connector
IEEE 802.3 Fast
Ethernet
100Base-TX Four pairs of unshielded
twisted-pair 5 cable with
RJ-45 connector for
10/100Mbps
Note:
The cable length from the print server to hub/switch
must not exceed 300 feet (Approximately 100
meters)
