Configuration from Embedded Web Server
5 - 28
Users can set up print server’s SNMP functions by using
their browsers.
1. Click
Setup
, it then appears the sub-menu.
2. Click
SNMP
, it then as shown in the following picture.
SNMP Community:
The print server supports up to two
community names. The default
community name is
public
(case-sensitive), with
Read Only
access right in default.
Support HP WebJetAdmin:
This option allows user
determine to disable/enable
the Support HP
WebJetAdmin.
SNMP Traps:
Enable the function of sending SNMP
Authentication Failure trap message to the
network administrator, if the community
name within a SNMP request is not correct.
