24
The
Administrator Setting
page provides the following configuration options:
a.
Change Administrator’s User Name and Password
b.
WAN Side Administration
WAN Side Administration
You can configure the Broadband Router to be managed from the WAN side, Internet,
via web browser with a specified port number. Click the check mark of the “
Allow
administration from WAN side with port
” to enable the remote access to the
Broadband Router. You can change the HTTP server default port number, 80, to any
number in the range 1 to 65535 if it is desired or the port 80 of a virtual server is
enabled. For example, the port number 8080 is specified in the following case.
Click the “
Apply
” button to make the remote access effective.
5.5 Firmware Upgrade
A web-based interface, via Microsoft Internet Explore or Netscape web browser, is
provided to allow the user upgrade the latest firmware to the Broadband Router. The
firmware upgrade could be executed from the LAN side (local upgrade) or WAN side
(remote upgrade)
Pre-requirements
?
A copy of the latest firmware of Broadband Router
?
A computer (Window-based, Unix-based or Mac-based) running aweb
browser (either Internet Explore or Netscape)
?
The network connection from the computer to the Broadband Router, which is
targeted for the firmware upgrade. To make a local network connection, user
can plug one end of Ethernet cable into the computer’s Ethernet port and the
other end of cable to the Broadband Router’s one of four LAN ports.
