13
Chapter 4 Use Your Broadband Router
Follow the instructions in this chapter to perform the setup via “
Quick Setup
.” If you
want to learn more about the DHCP setup of your client PC, please refer to the section
of
A.1
Enable DHCP in Your PC
in
Appendix A: Configure TCP/IP in Your PC
.
4.1 Check the Web Proxy
Because the enabled-Web Proxy setting may cause failure in accessing Broadband
Router ’s Web Configuration Tool, verify that you have disabled the Web Proxy before
launching your Web browser. If you do not know how to disable the Web Proxy, refer
to the section of
Disable Web Proxy
in
Appendix A: Configure TCP/IP in Your
PC
.
4.2 Wizard Setup
Step1. Launch a web browser on your client PC connected to Broadband Router.
Then point the Web browser to
http://192.168.1.1
(http://192.168.1.1 is
Broadband Router’s default IP address.) If the router IP address was
configured with different IP address, use the configured IP address instead of
192.168.1.1. Please make sure your computer IP address is located in the same
subnet of the router IP address.
Step2. Press “Enter” key after typing the router IP address. The “user name and
password” screen will appear (Figure 4.1). Enter the default ID “
admin”
and
the default password “
admin”
to obtain authentication. (Figure 4 –1) If the
user name and password were changed, type the latest user and password; then
click the “
OK
” button. Figure 4 – 2 will be the next screen.
