Operating conditions:For in door use only
Electrical ratings
Model No.
Volt.
Output
Load Type
Complete Declar.
(i.e. 1.C.L, etc.)
intelliPLUG
120 V,
60Hz
15 A
Resistive
Type 1.B, Operating
15 A
General Use
600 W
Tungsten
500 VA
Electronic Ballast
1/2 hp
Horse Power
3.
Operating ambient temperature
:
0~40
℃
Type of Action:Type of 1.B
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment must be installed and
operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons.