1
2
Stefan Gemeinert,Frühlingstrasse 8 85253 Erdweg
Tel: 081386695536 www.cnc-technics.de
Set spindle
Port 1 / Pin 1 is the analog output for the spindle speed
A VFD frequency inverter for the analogue signal can be connected to the spindle output. Via
jumper 1-2 = 5V or bridge 2-3 = 10V output signal at bridge
The Potentiometer R13 should not be adjusted he is set so that at 5V PWM output from the
PC comes a 10V analog signal
