XNET Network Video Server User’s Guide
14 of 44
unless other IP sharing devices sit in-between the client and the IP video products. For more
detailed information regarding the use of IP sharing device refer to the document
[Use of
Private IP network using IP-sharing-device]
.
3.2. Connecting to xDSL/Cable Modem
1. Follow through steps 1 to 4 in Section 2.5 to assign IP address and other network parameters
to XNET.
2. Install XNET and connect it to xDSL or Cable modem as in Figure 3-2.
Figure 3-2. Connecting the XNET to ADSL Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as
assigning IP address for the case of LAN using IP-installer. To enable the notification of
the changed IP address to the user over e-mail when the IP address is changed in
floating IP environment, you have to assign the e-mail address when user name and
password are input using IP-installer.
(Management server provides a convenient
way of connecting to your network camera under dynamic IP environment.
Please refer to the Application note regarding “Management Server” in the CD.)
When connecting XNET to xDSL or Cable modem, usually regular LAN cable is
required. But since some modems has crossover connections, please contact your
service provider for detailed information.
②
XNET
IP Network
(LAN/WAN
)
xDSL/
Cable
Modem
Client
PC
