XNET Network Video Server User’s Guide
12 of 44
Frame Rate
The number of frames to be
transmitted per second.
users smaller than or equal to
the number.
Video Rate
Bandwidth
assigned
for
video
transmitted from XNET.
User
Admin &
Time Setup
Administrator
name &
password
For safety, you are recommended to
change these values from factory
default. For new connection, you
need to input changed values for
corresponding fields. Do not disclose
these values to others and memorize
these values.
Default value
Username :
root
Password :
dw2001
User
Admin &
Time Setup
Current Time
Input correct time in this field.
Default value :
2001/1/1
6.
Connect the input and output signals to XNET.
Connectors
Function
Signal description
Number
VIDEO
Input
Video input
Connect external video source(NTSC/PAL)
1
VIDEO
Output
Video output
Video loop output(NTSC/PAL)
1
LINE-
In/MIC
Audio input
Connect microphone or output from audio
devices.
1
Line Out
Audio out for speaker
Audio from remote site is available from
this connector in bi-directional audio
mode. Connect speaker with amplifier.
1
Alarm In
Connecting Alarm
Sensor
IR
sensor,
Motion
Sensor,
Smoke
Detector…
1
Alarm Out
Connecting Alarm
annunciating device
Siren, Flashing Light, …
1
RS485
PT device control
Remote P/T/Z device connection having
RS485 interface.
1
NETWORK
Network connection
Connect XNET to the network, LAN, ADSL
or Cable modem.
1
7.
Remote video connection to XNET
Run “XNET-NVR” on your PC. Before connecting to XNET it is needed to configure the
connection information on the XNET-NVR. More detailed information of using “XNET-
