then press the "
" key to make the "
" indicator light flash in red, and enter the
password again. If you forget the password, you can press and hold the " " key, and
power on again to restore the factory default password "1234"
3.4. "
" setting operation:
In the unlocked state, long press the "
" key, release it after 3 seconds. The
"
" indicator flashes green, indicating that it has entered the setting state.
In this state, the behavior learning setting of program opening and program closing
can be performed, and the normally open channel can also be set or the password
can be modified.
3. 4. 1: Set normally open channel:
"
"When the indicator light is off, press the channel key to select the channel that
needs to be normally open. At this time, the opened channel is set as the normally
open channel, that is, after the machine is powered on,
These channels are open and are not controlled by the program switch. At this time,
press the "
" key to exit the well storage or continue the program opening,
program closing, and password modification setting operations.
3. 4. 2: Program open settings
Press the "
" button, when the "
" indicator light is green, enter the program
opening setting. If you want to start the program in the order of "1, 3, 4, 8, 7, 6, 5, 2",
You only need to open the corresponding channels in order, and the open delay is
the corresponding waiting time. The longest delay is 60 minutes, and it will
automatically exit after timeout. When setting up the program
"
When the channel is open or closed, you can remember the channel open or close
(up to 16 times). After setting, press the "
" key to exit the well and save. You can
also continue to press 3.4.3 to set the program off.
3. 4. 3: Program off setting
Press the " " key, when the " " indicator lights red, enter the program off setting.
If the program is opened, press "2, 5, 6, 7, 8, 4, 3, 1" in the order
Off, when setting the program off, you can remember that the channel is open or
closed (up to 16 times), just turn off the corresponding channels in order, and the
delay of closing is corresponding
waiting time. The longest delay is 60 minutes, and it will automatically exit after
