4
Read and understand all instructions.
Failure to follow all instructions listed
below, may result in personal injury.
•
Make sure all moving parts are free
from interference.
•
Keep hands clear of all moving parts.
• Ensure super jaws is set up on firm ground in
a stable manner.
• Be aware of overbalancing.
When a large
piece is cut from one end of a job, the
remaining piece may be heavy enough to
over-balance the super jaws. Always ensure the
workpiece is well supported.
•
Check to make sure that all fixing screws
and knobs are tight and all legs are locked
into place before operating the super jaws.
•
The tool must be used only for its prescribed
purpose.
Any use other
than those mentioned in these instructions
will be considered a
case of misuse.
The manufacturer shall not be liable for any
damage or injury resulting from such cases of
misuse.
•
The manufacturer shall not be
liable for any changes made to the tool
nor for any damage resulting from such
changes.
GENERAL SAFETY RULES
General Safety Rules / Symbols
Always wear ear, eye and
respiratory protection when operating
power tools.
Read the instruction manual
Instruction warning.
Instruction note.
Do not use this product as a
step or platform.
SYMBOLS
Summary of Contents for CMT200
Page 37: ......
Page 38: ...www cmtutensili com...
