Issue 6 31/1/14 - CMS Marine - +44 (0) 1452 380100 – [email protected]
Page 11
Fitting – Power Supply Unit.
All SonicShield units are supplied with a Mains / Shore 110-240V Power supply unit. Also included is an EU
and UK Power lead.
Select the correct lead for your boat type and plug the Fig 8 end into the Power Supply Unit.
Using the supplied Velcro, attach the power supply unit to a solid surface, ensuring this is located in an area
above your boats water line.
Note
The control unit is intelligently controlled and is able to accept both the 12V/24V supply from your battery
and the shore power supply at the same time. It will detect which power supply to use and will only draw
current from one source at any time.
For example if shore power is available it will always use this supply. It will only switch to the 12V/24V
battery supply if the shore power is removed. If you intend to only use the shore power then there is no
need to install the 12V/24V battery supply, we do not advise running from only AC as if shore power is
removed you will not have any cleaning.
It is not necessary to install the AC for the system to run.
Summary of Contents for SonicSheild III
Page 1: ...Issue 6...
