6
Camera Installation Dealer Manual
.................................................................................................................................................................................................
Wireless Configuration
YOUR CAMERA HAS THE ABILITY TO COMMUNICATE WITH YOUR WIRELESS ROUTER
WITHOUT AN ETHERNET CABLE.
Depending on the type of wireless router you have, you may be able to do this with a one
touch feature known as WPS. This will allow you to pair and save wireless configuration
data to your camera directly from your router. Refer to the WPS Enabled Routers section
on page 13 of this manual and the owner’s manual of your wireless router for further
instructions.
If your wireless router is not WPS Enabled continue with wireless configuration setup.
Before continuing you will need:
Network Name (SSID) — the name of your wireless access point. The SSID is case sensitive.
Network Key (Password) — if your access point has security protocols it will require a
password. The Network Key is case sensitive.
Network Security — Security protocols used for network protection: WEP, WPA-PSK,
and WPA2-PSK.
Algorithm — Encryption information for password: OPEN, TKIP, AES. AES is the most
common.
If you do not have this information,
contact your Internet Service Provider or consult the owner’s manual for your
wireless router on how to retrieve the information.
