9
Camera Installation Dealer Manual
.................................................................................................................................................................................................
Wireless Configuration
Testing Wireless Settings
Once the UPDATE is complete you will get a confirmation message.
Now it’s time to test your wireless network settings. Disconnect the power and
Ethernet cable from your camera. Wait about 15 seconds for the camera to power
down fully. Do not plug the Ethernet cable back into the camera. Restore POWER
to the camera. If your wireless settings were saved correctly your camera will start
up as normal and connect to your wireless network. The FRONT LED will be DARK
GREEN FLASHING. If it is FLASHING DARK GREEN, you have successfully configured
your camera for wireless communication.
If your camera REMAINS LIGHT GREEN SOLID, disconnect the power, plug in the
Ethernet cable, and restore power. Attempt the wireless configuration portion of
this manual again. If further assistance is needed contact customer support.
