page 12 of 30
All content © 2019, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
Wireless applications for robotics and motion control are possible without any additional
accessories (e.g. LCUBE-1) through the cPRO camin`s CAM to serial interface.
The cPRO camin can even increase your LCS wireless range. Simply connect 2 cPRO camin
with an LBUS cable, set one to master, the other one set to client to create an RF repeater
to achieve a wireless range of up to 2,000m.
In order to switch between master and client, simply press and hold the upper button on the
cPRO camin for 3 seconds. Then, select master or client with the up/down buttons and wait
for 5 seconds to enable the function.
Command mode is available from software version 3.0.
For further information on how to use command mode, please refer to section “6.5. Setting
up the cPRO camin´s command mode” on page 18 in this manual.
5.2.3.
Region settings
The cPRO camin offers radio settings for different areas (with red-radio module EMIP400).
Make sure that you select the proper area you are operating the device in.
All available region settings comply with Part 15 of the FCC rules.
Push the lower button for 6 seconds to enter the region settings menu. Push momentarily to
toggle through the regions. Select WORLD if your specific region is not listed.
Region Setting
Country code
Australia
AU
Canada
CA
China
CN
Egypt
EG
Europe
EU
Hong Kong
HK
India
IN
Japan
JP
New Zealand
NZ
Philippines
PH
Singapore
SG
South Africa
ZA
South Korea
KR
Taiwan
TW
Thailand
TH
UAE (United Arab Emirates)
AE
USA
US
World
WORLD