
NIKI V4
Operator’s Manual
15
No.
Description
Function
1.
Display
LED display
2.
MACRO
The pump is operating in the Macro program.
3.
SELECT key
Used to scroll between rate, time, volume to be infused,
and total volume infused.
4.
RUN / HOLD key
Start/hold the program
5.
Arrow key
Setting the desired values for rate, time and vtbi.
6.
Pumping block mounting
screw
Connect the pumping block to the front housing.
7.
Latch holder
Holds the door closed when latch is positioned.
Horizontally.
8.
Pressure sensor
y
Detects downstream tubing restriction and occlusion.
y
The alarm level can be adjusted to suit the needs
of the hospital department.
9.
Press plate
Connected to the door by 3 springs.
10.
Pump door
Covers the press plate.
11.
Recessed latch
Push to open door.
12.
RATE
The rate message indicates that the figure shown on the
display is the current rate.
13.
VTBI
The volume to be infused.
14.
VI (Volume Infused)
The accumulated infused volume, from the time the
CLEAR key was last pressed.
15.
ON/OFF key
Switches the pump on and off.
16.
Charge indicator
Lights when pump is connected to main.
17.
PRIME key
Pressing the prime key, at the data setting stage, after
door open or air alarm, will remove air from administration
set.
18.
Air sensor
Ultrasonic air detector, mounted on the front housing.
19.
Tubing Guide
Guide the Administration set
20.
Air sensor
Mounted on the door.
21.
Door springs
Located between the door and press plate.