C.M.C. n.v. - Airmaster S1 installation guide – V1.2 – MANY0402A.00
1. Introduction
The Airmaster S1 is an industrial controller
This hardware installation guide is a guide for the hardware related items. Please read
the software specifications file for information on how to work with the unit.
The application area is restricted to machines that comply with the European machine
directive 89/37/EEC and the EMC directive 89/336/EEC. The application area is located
in electrical driven compressors and dryers in an industrial environment. Please contact
CMC for appliance in other machines.
The Airmaster S1 does not need to comply to the European Pressure Equipment
Directive 97/23/EC, because no parts are under pressure, and the Airmaster S1 is not a
safety component.
The Airmaster S1 is a component, which can’t operate without other components.
However, it is not a safety component, and it is not a machine.
The controller is to be used in a standard industrial environment. The controller may
only be used in places without an explosion risk. So it may never be used where
explosion-proof equipment is required. This controller may not be used for maritime
purposes. It may also not be used in any way as part of an assembly that could be used
for military or terrorist use.
The Airmaster S1 base unit without additional protection is to be used in areas of
pollution degree 1 or 2. Of course the user can add additional protection for higher
pollution degrees.
The installation of the controller must be made in accordance with the applicable
national and international standards and regulations.
For the American market UL508 is applicable, in accordance with the NFPA.
National and international directives and standards can change
in time. Please check them at a regular basis, and make
modifications to your equipment where this should be necessary.
Page 4 of 35
