CMC Airmaster R1, Hardware Installation Manual

Page: 27 / 41

C.M.C. n.v. - Airmaster R1 installation guide – base unit – V1.1 – MANY0317A.00
Page 27 of 41
7. Mounting of the base unit
The Airmaster R1 base unit can be mounted on a industry standard DIN-rail in 3 steps:
Step 1: Unlock the unit
by rotating the notch to
the right.
Step 2: Place the unit on
the DIN-rail.
Step 3: Lock the
controller by rotating the
notch to the left with a
screwdriver fitting in the
hole until you reach the
end point (high
resistance). Check if the
controller is fixed firmly.
Note: if high vibration or shock levels are applicable extra locking of the controller can be
achieved by placing two lockable earth wiring terminals (not included). One terminal is
mounted on the left side and the other one on the right side of the controller