Operating instructions
Displaying or a list of abnormal points in an active
service group
Use the Test command on the Status menu to display a list of
points in an active service group that are not in the normal
condition. The list also includes the name of the active service
group.
To display a list of abnormal points in an active
service group:
1.
Press Status.
2.
From the Status menu, choose Test.
3.
Press Enter to accept the default (all panels).
4.
On the Report Output menu, choose one of the following:
•
Display to view the list on the alphanumeric display
Display a list of disabled points
Use the Disabled Pts command on the Status menu to display a
list of points that are disabled. The list shows the device type,
address, and the event message for each disabled point.
To display a list of disabled points:
1.
Press Status.
2.
From the Status menu, choose Disabled Pts.
3.
Press Enter to accept the default (all panels).
4.
On the Report Output menu, choose one of the following:
•
Display to view the list on the alphanumeric display
Displaying power supply voltages
Use the Internal command on the Status menu to display the
current power supply voltages.
To display power supply voltages:
1.
Press Status.
2.
From the Status menu, choose Internal.
3.
Press Enter to accept the default (all panels).
4.
On the Report Output menu, choose one of the following:
•
Display to view the list on the alphanumeric display