Club Car Precedent Stretch, Owner'S Manual

Page: 35 / 48

Battery Charger
Refilling the Batteries
1. Locate the battery fill coupling (9) on the driver side of the battery compartment, remove the dust cover (10)
from the male connector
(Figure 15) , and connect the hose-end assembly (3) (Figure 16) . The water flow
will begin immediately.
10
9
8
9
3
70
Figure 15 Dust Cap
71
Figure 16 Connecting Hose-end Assembly to Battery Fill
Connector
2. The red flow indicator balls should swirl, indicating that the batteries are being filled. See following CAUTION.
CAUTION
• If at any time water overflows from the batteries, immediately stop the refill process, disconnect the
pressure regulator from the battery fill coupling, and call for service.
3. When the red flow indicator balls stop moving, immediately press the grey button to disconnect the hose-end
assembly from the battery fill coupling (9), and squeeze the dust cover (10) to lightly secure it to the male
connector of the battery fill coupling
(Figure 15) .
4. Place the battery fill coupling into the space between the battery bucket and the car body. Leaving the fill coupling
on top of the battery bank or tucked between the batteries and the battery bucket can result in coupling damage.
5. Turn the water faucet off when finished filling the vehicle(s).
BATTERY CHARGER
Each electric vehicle is supplied with a fully automatic battery charger as standard equipment. Refer to the owner’s
manual supplied with the battery charger for more information.
Precedent Stretch Owner’s Manual Page 33