Club Car High Frequency 912-4852, Owner'S Manual

Page: 12 / 20

Operating Instructions
OPERATING INSTRUCTIONS
See General Warnings on page 5.
CHARGER DISPLAYS
10-LED display on charger:
LED Color Indication
(following
“Power-On Self
Test”)
Solid: Displays approximate scale of current output during bulk phase. Ammeter
(Amber)
Flashing: High internal charger temperature. Output reduced. Also
displays algorithm #1-6 for 11 seconds if no battery is connected.
Solid: Bulk charge phase complete, 80% charged. In Absorption phase. 80% Charge
(Amber)
Flashing: With no battery connected, indicates algorithm # selected by
number of flashes.
Solid: Charging complete. Charger in Maintenance Mode. 100% Charge
(Green)
Flashing: Absorption phase complete. In Finish phase
Solid: AC Power good AC On
(Amber)
Flashing: Low AC Voltage. Check voltage and power cord length (see
above for guidelines).
Fault (Red) Flashing: Charger error. Reset charger power and refer to Troubleshooting
Instructions below.
Charger Information Light (Single-LED display mounted on dash of vehicle):
LED Color Indication
(following “Power-On
Self Test” in which each
light will flash once
in order from red, to
green and amber)
Solid: Charging complete. Charger in Maintenance Mode. Green
Flashing: Short: <80% Charge.
Long: >80% Charge.
Amber Flashing: Reduced Power Mode: Low AC Voltage or High
internal charger temperature.
Red Flashing: Charger error. Reset charger power and refer to
Troubleshooting Instructions below.
Page 10 High Frequency Battery Charger Owner’s Manual for Custom Solutions