Rear Fender Installation
Page 38
2007 Gasoline Utility Vehicle Owner’s Manual
REAR FENDER INSTALLATION
1. Unload the cargo bed.
2. Open the cargo bed and engage the prop rod.
ý
WARNING
• Use caution when working under bed. Be sure prop rod is secure. Otherwise the bed could
fall, resulting in severe personal injury or death.
NOTE:
The rear fender with the warning decal should be installed on the passenger side of the vehicle.
The decal should be plainly visible when the cargo bed is raised.
3. Position a fender in the vehicle, align the hole in the fender with the slot in the frame as shown and install
bolt (1), large flat washers (2), and locknut (3)
(Figure 22)
. Finger-tighten only at this time.
Figure 22 Install Hardware in Fender Hole
HOLES TO BE DRILLED
1
3
2
2
Front of
Ve
hicle
DRIVER SIDE SHOWN
Summary of Contents for CARRYALL 252 2007
