Driving Instructions
WARNING
• Avoid stopping a loaded vehicle on a hill. If a loaded vehicle must be stopped on a hill, avoid
sudden starts or rolling backwards and stopping suddenly. Failure to heed this warning could result
in overturning the vehicle.
• To help avoid possible injury to inattentive passengers and (or) damage to the vehicle, avoid sudden
starts, sudden stops, and abrupt turns.
• To help avoid the possibility of losing control of or overturning the vehicle, reduce speed for adverse
driving conditions such as wet grass or rough terrain.
• Do not use the vehicle on public roads. It is neither designed nor intended for street use and should
not be licensed for use on public roads.
• The vehicle should be driven in only specified areas by trained drivers.
• Do not drive while under the influence of alcohol, drugs, or medications.
• Use brakes to reduce speed when coasting downhill.
• Never attempt jumps.
• Keep away from drop-offs, steep slopes, and unstable surfaces.
• Avoid extremely hard braking in reverse.
• This vehicle is not intended to be used where risk of falling objects exists. If your vehicle will be used
in such an environment, contact your local dealer.
No one should drive the vehicle without first being instructed in the proper operation and use of vehicle controls. An
experienced operator should accompany each first-time driver on a test drive before allowing the driver to operate
the vehicle alone.
To ensure safe operation of the vehicle, follow exactly and in order, all of the following procedures. Read and
understand all instructions prior to driving the vehicle.
STARTING THE VEHICLE
1.
Read safety and information decals located on the vehicle.
2.
Be sure load, if any, is secure.
3.
Study and understand all controls.
4.
Be sure all passengers are seated with seat belt fastened and holding on to hand holds. Driver should have both
hands on the steering wheel.
5.
Make sure wheels are turned in desired direction and nothing is in your path.
6.
Make sure the Forward/Reverse handle is in the NEUTRAL position.
7.
Press and hold the brake pedal.
8.
Start the vehicle.
8.1. To preheat glow plugs in cold weather, turn the key to the PREHEAT position and hold for 10 to 15 seconds.
Then turn the key all the way to the START position and hold until the engine starts. If the engine does not
start after 10 to 15 seconds, return the key to the OFF position and repeat the procedure. Once the engine
starts, release the key and it will return to the ON position. The engine will idle in neutral.
9.
In cold weather, allow the engine to warm before using any attachments. Once the vehicle is warm, increase the
engine RPM and cycle the attachment arm several times.
10. Pull the joystick backward to raise the attachment arm only high enough to clear obstructions on the ground.
11.
Release the park brake.
12. While keeping the brake pedal engaged, select direction of travel by placing shift handle in desired position
(Figure 13)
. Engine must be at idle before moving shift handle. If equipped with a reverse buzzer, the reverse
buzzer will sound as a warning when the Forward/Reverse handle is in the REVERSE position.
Page 32
IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual
Summary of Contents for Carryall 1500 IntelliTach
Page 2: ......
Page 83: ......
Page 84: ...Publication Part Number 103472517 Edition Code 0608G0613F 103472517...