Club Car Carryall 1500 IntelliTach, Owner'S Manual

Page: 24 / 84

Controls and Indicators
To lift the bed, push up and hold the rocker switch in the upper position. Release the switch to stop the lifting operation.
To close the bed, press down and hold switch in the lower position. The bed lift will make a loud clicking sound to
signal that the bed is in the rest position.
HIGH-TEMPERATURE WARNING LIGHT
The high-temperature warning light (11) is located on instrument panel to the left of the steering column, next to the
low oil warning light. The diesel engine is liquid-cooled; if the engine coolant has exceeded its normal safe operating
temperature, the warning light will illuminate. If the warning light comes on, stop the vehicle and allow it to idle for
approximately five minutes before stopping the engine. Contact a Club Car dealer/distributor or a trained technician.
See following WARNING.
WARNING
• Allow the engine to cool before servicing the engine coolant system. Engine coolant can cause
severe burns.
HYDRAULIC CONTROLS
WARNING
• The hydraulic system is active as soon as the start key is in the ON position; the vehicle engine
does not need to be running.
• To avoid accidently engaging the hydraulic system, press the joystick ON/OFF rocker switch (18)
to the OFF position (Figure 13). All hydraulic interface controls, (joystick, float, and auxiliary) are
disabled while the switch is in the OFF position.
CAUTION
• Do not tamper with the hydraulic power unit settings. These settings are factory preset, and if
adjusted will void the warranty.
• Do not operate the attachment arm without the engine running, as battery discharge will occur.
Page 22 IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual