www.cls-led.com
www.cls-led.com
- 5 -
- 6 -
Connect LED fixture
Locate the “OUTPUT” connection block at the top of the LDC-41,
check information sticker on the side of the LDC-41. Connect the
fixture’s RED positive (+ or anode) to Channel 1 (R) of the LDC-41.
Repeat this step for the Green, Blue and/or White/Amber colour.
If all colours have separate negative (- or cathode) wires then tie
them together and connect to negative (-) power input of the
LDC-41. If all colours have a combined negative (- or cathode)
wire, connect to negative (-) power input of the LDC-41.
The LDC-41 can also control single colour LED fixture’s. You can
use the 4 output to create different zone’s that can be controlled
separately or simultaneously.
Locate the “INPUT” connection block at the top of the LDC-41, check information sticker on the side of
the LDC-41. Connect the positive (+) output of the power supply to positive (+) power input of the LDC-41.
Connect the negative (-) output of the power supply to the negative (-) power input of the LDC-41.
ATTENTION!
Make sure that NONE of the products you are working on,
are powered!
WARNING
48 VDC
Amber / White
Blue
Green
Red
Anode
(+)
Cathode
(-)
Anode
(+)
Cathode
(-)
Anode
(+)
Cathode
(-)
Anode
(+)
Cathode
(-)
INSTALLATION
CONNECT POWER SUPPLY
This section describes in general terms how to install the LDC-41. How to setup the menu, data link and
how to connect it to a fixture.
Mounting
The LDC-41 has a unique feature, it is designed to be installed on a DIN-rail. Now it is possible to install
the LDC-41 directly next to the power supplies which are also suitable for DIN-rail mounting.
This helps to keep your installation work modular and fault proof.
Connect to DMX
The LDC-41 has two connections for DMX. Both DMX connections are input/output.
When using the LDC-41 with a DMX controller, other than the CLS Zense you can find the connection
method on the side of the LDC-41. When no UTP cable is used it is adviced to use the LD-serie gender
changer cable (art. 911465).
Input
Output
DIN rail
Max. 30 CLS LDC-41 in one chain
DMX Controller
CLS BT
power supply
CLS LD serie GII adapter
cable XLR3 male to RJ45
# 911465
PINNING DMX OUTPUT
2
2
3
4
5
6
6
5
4
3
2
4
3
2
3
4
1 .G ND
2.D-
3.D+
1 .G ND
2.D-
3.D+
DMX OUT
DMX IN
DMX OUT
DMX IN
XLR3
XLR5
4. N/C
5. N/C
2
2
3
4
5
6
6
5
4
3
2
4
3
2
3
4
1 .G ND
2.D-
3.D+
1 .G ND
2.D-
3.D+
DMX OUT
DMX IN
DMX OUT
DMX IN
XLR3
XLR5
4. N/C
5. N/C
PIN
COLOUR
FUNCTION
1
Orange/white
DMX data +
2
Orange
DMX data -
3
Green/White
Not connected
4
Blue
Not connected
5
Blue/White
Not connected
6
Green
Not connected
7
Brown/White
DMX Common
8
Brown
DMX Common
