Clover CDR-4770, Instruction Manual

Page: 46 / 90

44
DIGITAL VIDEO RECORDER
SEARCH / PLAYBACK
Ⅶ
2. Log List Search/Alarm, Motion Search
The logs can be used to directly search and review a particular event in the recorded data. Alarm, motion, video loss and system related
logs can be searched and played directly from the time of the incident.
1
.
To start Event Search, press [Log] button on the remote controller to view the log List menu, as shown below.
2
.
Select “Time“ to play by using Up/Down [
…†
] buttons. Proceed to next page by using Left/Right [
œ √
] buttons.
3
.
Press [ENTER] button to start playback.
ALL • Lists all events since the initial operation of the system.
SYSTEM • Lists all events except for Alarm, Motion, and Video Loss.
ALARM • Displays alarm list.
MOTION • Displays motion list.
VIDEO LOSS • Displays video loss list.
MENU TAP CONDITION
NOTE
• Log list is saved on the system’s HDD.
• To copy a log, connect USB memory stick into USB port on the front.
Then press Menu button for each category to backup the log.