24
DIGITAL VIDEO RECORDER
7.
Save changes
and exit the menu. Press
[ENTER]
button to navigate “RECORD” Menu.
8.
Select
“ON”
or
“OFF”
to Enable or Disable motion detection per camera, as shown below.
9.
Press the REC button to begin recording. Motion recording begins according to the configured Recording Quality and Frame Rate
when Motion is detected. Stand-by mode will resume after motion recording time is finished. Recording does not commence under
normal conditions.
MOTION GRID
• Designate a motion grid by using numeric buttons on the remote controller and press Enter button.
• Select smaller motion grids for more precise motion detection by using CMS.
ITEM
ADJUSTMENT
NOTE
• Motion Duration will be extended if there is additional motion detection while motion recording.
• There may be cases when the recorder’s built-in motion detection function would not operate properly due to the
strength and quality of the input video signal and other factors.
• Users are recommended to select 3 or more motion blocks to get more accurate motion recording.
OPERATION
Ⅴ
Summary of Contents for CDR-4770
Page 2: ......
Page 51: ...CLIENT PROGRAM CLViewer...
Page 52: ......
Page 90: ...88 DIGITAL VIDEO RECORDER...
