5.12.4 TINT
•
Choose
the
TINT
with the
UP/DOWN
buttons.
•
Press
the
ENTER
button to change the values with the
UP/DOWN
buttons.
•
After changing the values, press the
ENTER
button.
5.12.5 SHARPNESS
•
Choose
the
SHARPNESS
with the
UP/DOWN
buttons.
•
Press
the
ENTER
button to change the values with the
UP/DOWN
buttons.
•
After changing the values, press the
ENTER
button.
6. INSTALL THE HDD
6.1 INSTALL THE HDD1
DVR manufacturer already installed a 160GB of HDD1 as MASTER in the removable HDD rack.
Just in case, refer to the following explanation on how to install HDD (Hard Disk Drive).
CAUTION The power switch must be turned off before installing
.
Removable HDD Rack
USB
PAUSE
REC
ALRST
PTZ
BACKUP
WTMK
SETUP
A-LIST
SEARCH
ESC
STOP
REW
FF
PLAY
AUTO
ENTER
QUAD
PIP
POP
CH3
CH4
CH2
CH1
REC
PLAY
TIMER
ALARM
FULL
POWER
1. Separate the removable HDD rack from the system.
2. Refer to the HDD manufacturer’s directions on how to set the jumper for master or slave when
assembling.
3. Make sure that the power connector and the flat cable to the HDD are properly connected.
4. Attach the HDD to the removable HDD rack and secure it with the supplied screws as below.
5. Assemble and put the removable HDD rack back in it’s place.
- 38 -
