34
the "
" button, right into the list box, and then click the "configuration" to confirm; If you want to
select the full band frequency hopping just click
all the frequency points will show on the right
side of the list box, click the "configuration" to confirm. If you click
, all frequency points on the
right side of the list box will be cleared.
Image 4-25 Frequency Band selection
Note: The purpose of setting up the "automatic" is to avoid the interference of the external signal and
select the fast frequency hopping. The default configuration for general application is automatically
(as shown red mark dropdown list in image 4-24).
4.5.10 Label filtering
Select "configuration" on the main interface > "RFID configuration" > "label filter", then pop-up
dialog box, as shown in image 4-26: