CL7206B user manual
40
you want to select the full band frequency hopping just click
all the frequency points will
show on the right side of the list box, click the "configuration" to confirm. If you click
, all
frequency points on the right side of the list box will be cleared.
Image 4-25 Frequency Band selection
Note:
The purpose of setting up the "automatic" is to avoid the interference of the external
signal and select the fast frequency hopping. The default configuration for general application
is automatically (as shown red mark dropdown list in image 4-24).
4.5.10 Label filtering
Select "configuration" on the main interface > "RFID configuration" > "label filter", then
pop-up dialog box, as shown in image 4-26:
Image 4-26 label filtering
