13
Secure unit via drywall mounting.
Please use an assistant to help hold the unit during the mounting process to avoid possible tip over.
Please note that this mounting option requires separate hardware not included with this product. The ClosetMaid
drywall mounting package (SKU: 2062800) is recommended for a secure fit.
Align the unit with the location on the wall where you plan to mount it. Ensure unit is level and change adjustable feet
height if necessary. Have an assistant hold the unit, locate the four large circles on the back panel, and use a pencil
to mark their locations on the wall. Rotate unit away from wall and carefully drill a 1/2 in. hole into the drywall at each
marked location where you are inserting a toggle. Insert toggles into holes, pull tight against wall, zip plastic square
pieces to wall, and snap long plastic pieces off to secure. Rotate the unit back to the wall, make sure holes align with
toggles, and use a #2 Phillips screwdriver to secure the four fasteners and four M5 washers (EE) through the four holes
in the back panel into the placed toggles.
*Maximum height extension for adjustable feet is 1.5 in.
*Please note location of predrilled holes on each part.
*Only the M5 washers are included in this package. You must purchase the 3/16-24 x 2-1/2 in. toggler zip snap toggles and bolts from
ClosetMaid (SKU: 2062800) or your local hardware store.
STEP 7c
#2 Phillips
x 4
EE
5/16 in. Masonry
Drill Bit
