11
Secure unit via concrete mounting.
Please use an assistant to help hold the unit during the mounting process to avoid possible tip over.
Align the unit with the location on the wall where you plan to mount it. Ensure unit is level and change adjustable feet
height if necessary. Have an assistant hold the unit, locate the four large circles on the back panel, and use a pencil to
mark their locations on the wall. Rotate unit away from wall and carefully drill a 5/16 in. hole that is 2-1/2 in. deep at the
marked locations. Insert the four anchors (CC) in the wall and tap flush with a hammer. Rotate unit back to wall, make
sure holes align with anchors, and use a #2 Phillips screwdriver to secure the four ST4.8 x 57 mm. pan head tapping
screws (DD) and four M5 washers (EE) through the four holes in the back panel into the anchors.
*Maximum height extension for adjustable feet is 1.5 in.
*Please note location of predrilled holes on each part.
STEP 7a
x 4
EE
x 4
CC
EE
CC
DD
x 4
DD
5/16 in. Masonry
Drill Bit
#2 Phillips
