12
EE
DD
Secure unit via stud mounting.
Please use an assistant to help hold the unit during the mounting process to avoid possible tip over.
Locate studs and align the unit with the location on the wall where you plan to mount it. Ensure unit is level and
change adjustable feet height if necessary. Have an assistant hold the unit, locate the four large circles on the back
panel, and use a pencil to mark their locations on the wall. Use a #2 Phillips screwdriver to secure unit to wall by
attaching the four ST4.8 x 57 mm. pan head tapping screws (DD) and four M5 washers (EE) through the four holes in
the back panel into the studs.
NOTE: All four screws MUST be attached to studs for unit to be completely secured to wall. If any screws cannot
connect to a stud, proceed to step 7c to secure.
*Maximum height extension for adjustable feet is 1.5 in.
*Please note location of predrilled holes on each part.
STEP 7b
x 4
EE
x 4
DD
#2 Phillips
