E
N
G
L
I
S
H
5
For The Typical Portable Power
Source
1.
Turn ignition off before making
cable connections.
2.
Use in a well ventilated area.
3.
SHIELD EYES.
4.
Clamp the positive (red +) clamp to
the positive terminal on the weak
battery (for negative ground
system).
5.
Clamp the negative (black –) clamp
to the vehicle frame (ground).
Make sure the cables are not in the
path of moving belts or fan.
6.
Stay clear of batteries while jump
starting.
7.
Start the vehicle (turn on the vehicle
ignition).
Note:
If the vehicle doesn’t start
within 6 seconds, let the
portable power source’s
internal battery cool for 3
minutes before attempting to
start the vehicle again or
damage to the portable power
source may occur.
8.
When the vehicle is started,
disconnect the negative (–) battery
clamp from the vehicle frame.
9.
Disconnect the positive (+) clamp.
10.
Store the clamps in the holsters.
For The J2000 Portable Power
Source Only
1.
Turn ignition off before making
cable connections.
2.
Use in a well ventilated area.
3.
SHIELD EYES.
4.
Verify that the portable power
source is turned OFF (ON/OFF
switch is out, see Figure 3 and
Figure 4).
OFF
ON
Figure 4. ON/OFF Switch (J2000)
5.
Clamp the positive (red +) clamp to
the positive terminal on the weak
battery (for negative ground
system).
6.
Clamp the negative (black –) clamp
to the vehicle frame (ground). Make
sure the cables are not in the path
of moving belts or fan.
7.
Press the ON/OFF button to turn
the portable power source ON.
8.
Start the vehicle (turn on the vehicle
igntion).
9.
Stay clear of batteries while jump
starting.
Note:
If the vehicle doesn’t start
within 6 seconds, let the
portable power source internal
battery cool for 3 minutes
before attempting to start the
vehicle again or damage to
the portable power source
may occur.
10.
When the vehicle is started, press
the portable power source ON/OFF
switch to turn the portable power
source OFF and disconnect the
negative (–) battery clamp from the
vehicle frame.
11.
Disconnect the positive clamp +.
12.
Store the clamps in the holsters.
USED AS AN ALTERNATIVE
POWER SUPPLY FOR
VEHICLES
The portable power source is an
ESSENTIAL tool for all who replace
automobile batteries. Most vehicles have
some type of electronic component with
memory, such as alarm systems,
computers, radios, phones, etc. and when
the vehicle battery is replaced, the
memory is lost. However, if the power
extension cord is plugged from the
portable power source to the cigar lighter
on the vehicle, the memories can be
saved.
842-270-000 Portable Power Source En, Sp, Fr, Pg, Du.p65
3/12/01, 10:14 AM
5
