CLIVET WSAN-XIN 21-141, Installation And Operating Manual, Page: 25 / 72

M0R940E13-00 WSAN-XIN 21-141 25
8 Control
8.1 Display
Icon Fixed on Flashing Icon
Alarm on progress Silenced alarm Compressor
Heating mode
Antifreeze with active heat pump, remote
heating mode
Ventilation
Remote cooling Remote cooling mode
At the start-up is performed a board automatic test: all the
led flash for some seconds
Standby from keypad Remote standby Primary circuit water pump
Clock
Active scheduling
Clock setting
Scheduling
Heater ON - D.H.W.
Defrosting
Automatic
Manual defrosting activated
ON: Domestic hot water
Flashing: D.H.W. mode - standby
Not used Boiler activation request
8.2 Keys
Symbol Name Action Function (3 sec.)
Up
Increases the value
Next voice
Silenced alarm
Down
Decreases the value
Previous voice
On / Off *
Esc
Esc WITHOUT SAVING MODIFICATIONS
Previous level
Heat / cool / stdby / as
Set
Confirm
Esc WITH MODIFICATION SAVING
Go to the next level
STATA menu
Inputs / clock / active alarms / setpoint
Activate / disactivate the time bands
Access to the SETTING menu Parameters / function / password / alarms
* Unit in OFF the antifreeze function is not active.