42
ELFOFresh² BT15B012GB-00
So one just needs to identify the supply and extraction duct, which features the highest pressure drops.
(Normally it is the duct more extended or the one with the greatest number of curves)
The pressure drop in the supply/extraction section is therefore equal to the sum of the drops in pressure of its parts (openings, ducting, ducts), considering
the duct with the highest pressure drop for the supply/extraction ducts.
If the total pressure drop of the single sections is greater than the maximum available pressure, the distribution layout will need to be reviewed in order to
fall within this limit.
ELFOFAir Configurator SELECTION SOFTWARE
If done manually, sizing and checking the ELFOAir system requires an excellent knowledge of fluid dynamics.
ELFOFAir Configurator is an essential work tool that Clivet has put at the disposal of all professionals in order to make these operations simple, quick and
absolutely reliable.
Just enter a small amount of data regarding the home and ELFOAir’s distribution system and the software will
automatically and rapidly:
•
calculates the pressure drops on both sections
•
generates a complete bill of materials for the ELFOAir system.
Summary of Contents for ELFOFresh2 CPAN-U 70-120 Series
Page 71: ...Page intentionally left blank ...
