30
FOR DISMANTLING AND DISPOSING THE UNIT MUST
ALWAYS BE DELIVERED TO AUTHORISED CENTRES.
During dismantling, the fan, the motor and the coil, if working,
may be recovered by the specialised centres for an eventual
reuse.
All materials must be recovered or disposed or in compliance
with the relative national standards in force.
For further information on the dismissal of the unit, contact the
manufacturing company.
11.1 Disconnection
The disconnection operations must be carried out by qualified
technicians.
Avoid pouring or leaking in room.
Before disconnecting the unit recover, if present: :
- the coolant gas
- solutions to be cooled present inside the hydraulic circuits
While awaiting dismantling and disposal, the unit can be
stored, even outdoor, as bad weather and temperature
changes do not cause damaging effects for the
environment, as long as the unit has the electric, cooling
and hydraulic circuits intact and closed.
The units falling within the standard in question are marked
with the symbol at the side.
With a view of respecting the environment, our units are
manufactured in accordance with EC Directive on waste
electric and electronic equipment (WEEE).
The potential effects on the environment and on personal
health, due to the presence of dangerous substances, are
reported inside the use and maintenance manual, in the
residue risks section.
If necessary, additional information to that listed below can be
requested from the manufacturer/distributor/importer, as
responsible for the collection/treatment of waste deriving from
equipment contemplated by EC - WEEE, and the dealer from
where the equipment was purchased or the local services in
charge of waste collection.
The EC-WEEE Directive foresees that the disposal and
recycling of electric and electronic equipment, indicated
therein, are compulsorily managed through appropriate
collection, in adequate centres, separate to that used for the
disposal of mixed urban waste.
The user must not dispose of the equipment at the end of its
life-span, as urban waste, but convey it to appropriate
collection centres, as foreseen by the current standards or
indicated by the distributor.
11.3 EC WEEE Directive
11.2 Dismantling
11 - DISPOSAL
NOTE:
For further information on the decommissioning of the unit, contact the manufacturer.
The materials used for the construction of or that are present in the components are listed in the table.
Material
Use
Quantity in relation
to the weight of the
Present
Steel plate
Base, panels, stoppers, motor, fan, drift eliminators
High
Always
Aluminium
Frame, fan frame, motor casing, coils, dampers, condensate
High
Always
Copper
Coils, motor
Medium
Always
Polyurethane
Panels
High
Optional
Mineral wool
Panels, silencers
High
Optional
Rubber
Gaskets, antivibration mounts, antivibration canvas
Low
Always
Nylon
Handles, hinges
Low
Always
Paper
Wet deck
Medium
Optional
