background image

 

 

2

WARRANTY

 

 

Norton warrants all products manufactured by it against defects in 
workmanship or materials for a period of one (1) year from the date of 
shipment to the customer. 
 
The responsibility of Norton under this warranty is limited to 
replacement or repair of defective parts at Norton's Stephenville, 
Texas factory, or at a point designated by it, of such part as shall 
appear to us upon inspection at such point, to have been defective in 
material or workmanship, with expense for transportation borne by the 
customer. 
 
In no event shall Norton be liable for consequential or incidental 
damages arising out of the failure of any product to operate properly. 
 
Integral units such as 

gasoline engines

electric motors

,

 batteries

tires

transmissions

etc

., are excluded from this warranty and are 

subject to the prime manufacturer's warranty. 
 
This warranty is in lieu of all other warranties, expressed or implied, 
and all such other warranties are hereby disclaimed. 

Important:  Before placing equipment in operation, record the following 
information. 

MODEL:_________  SERIAL NO.___________ 
PURCHASE FROM:  _____________________ 
ADDRESS:  ____________________________ 
CITY_______  STATE  ______  ZIP  ________ 
TELEPHONE NO.  ______________________ 

Before using this equipment, make sure that person using it  
read and understand the instructions in this owner’s manual.

  

Summary of Contents for HHD323





















Reviews: