VERS. 2018.05
CM70 ALU_MAN_EN
13
3
ASSEMBLY AND COMMISSIONING
The machine is delivered fully equipped and assembled (although without diamond blade) and is
ready for operation after connection to the appropriate power supply.
3.1 Tool assembly
Only NORTON blades with a maximum diameter of 700 mm can be used with the CM70 ALU.
All tools used must be selected with regard to their maximum permitted cutting speed for the
machine’s maximum permitted rotation speed.
Before mounting a new blade into the machine, switch off the machine and isolate it from the main
source of electricity.
To mount a new blade, follow these steps:
1. Use the cardboard accessory to support the head while you fix it in place
2. Depending on the size of blade you will use, fix the head in one position or another.
3. Install the spring.
4. Unfold the legs and fix them in place
