Clipline THERMOMARK S1.1, User Manual, Page: 61 / 68

Cleaning and troubleshooting
103932_ia_00 PHOENIX CONTACT
4-5
EnglishEnglish
Figure 4-5 Lifting the cover
• Carefully remove the cover of the cutter on the right-hand side.
Figure 4-6 Cleaning the cutter
• Clean the cutting knife with a cotton swab that has been dipped in isopropanol or
alcohol.
Figure 4-7 Rotating the cutter
• Rotate the cutter counterclockwise with the help of a 3 mm Allen wrench in order to
clean both blades of the cutter.
Assembly after cleaning the cutter
• Snap the cover of the cutter into place.
• Push down the protective cover from the top to the bottom.
• Insert the shaft.
• Mount the shaft securing with the help of flat pliers.