Clipline THERMOMARK S1.1, User Manual, Page: 45 / 68

Safety and the environment
103932_ia_00 PHOENIX CONTACT
1-3
EnglishEnglish
1.4 Notes on the print head
Please observe the following notes:
1.5 Storing the printer
The following must be observed when storing the printer:
1.6 Help in the event of malfunctions
NOTE: Print head wear
The print head is the most sensitive part of your printer. If used incorrectly, the print head
can be damaged very quickly.
Clean NOTE: print head appropriately
– Do not use sharp objects (knives, screwdrivers, etc.) to clean the print head.
– Clean the print head with a cotton bud that has been soaked with alcohol.
– The print head has a red protective glass layer at the top. Do not touch this protective
layer with your hand.
NOTE: Use the correct materials
During printing, always make sure that there is no dirt on the media as this could be pulled
underneath the print head, which could cause damage.
NOTE: Open the print head if it is not to be used for a longer period of time
If the THERMOMARK S1.1 is not used for several days, the print head must be opened.
This increases the service life of the print head.
– Only store the THERMOMARK S1.1 in dry surroundings.
– Store the printer in such a way as to avoid damage.
– Store the printer together with all individual parts and accessories to avoid
important parts becoming lost and being unavailable when it is used at a later
date.
Please contact our customer service department immediately if any malfunctions should
occur (hotline 0800/4 31 05 30). Never attempt to carry out repair work yourself.
Changes and/or modifications to the THERMOMARK S1.1 may only be carried out
following written permission from Phoenix Contact.