14
6.3. VoIP Setting
You need to register with the Internet Telephony Service Provider (ITSP) to utilize various VoIP services. You
may set the CWP-100 as your ITSP requests.
To set the system with the LCD and the keypad, follow the steps as MENU “3: System Setting” “2: VoIP
Setting”. Then you will enter the submenu and see the display as below.
1: Server Setting
2: Name Setting
3: Codec Setting
4: NAT Traversal
6.3.1. Server Setting
①
Follow the steps as MENU “3: System Setting” “2: VoIP Setting” “1: Server Setting”.
1
:
SIP Server
2
:
Register On
3
:
Registrar Server
4
:
Registration
5
:
Outbound Proxy
6
:
Expiry[sec]
②
Select “1: SIP Server” and input the SIP server address.
SIP Server
192.168.0.6
MODE :
A
③
To register with the Registrar server, press “2:
Register On
” and select “Yes.”
④
In the same way, set the Registrar Server, Outbound Proxy and r
egister Expires parameters.
Generally, the Registrar Server and Outbound Proxy are identical with the SIP Server.
The Registrar Server and Outbound Proxy may appear as FQDN
1
.
The Register Expires is the time for transmitting the Register message periodically so that the
CWP-100 keeps registering.
⑤
“4: Registration” indicates the current register status.
1
FQDN: Fully Qualified Domain Name. (domain name or IP address):(Port number). ex) clipcomm.co.kr:15060
