Clinton 85100 Operation, Care & Maintenance Download Page 6

Page: 6 / 8

TROUBLE SHOOTING

ADJUSTMENTS

PROBLEM:

Table is squeaking.

SOLUTION: Lubricate the table at designated points using Molykote G-0052Fg grease.
See drawing below for lubrication locations.

Slide Block, 4 total (Base and Top Frame)
Lubricate using Molykote G-0052Fg
grease, top and bottom contact points.

Base

Top Frame

End Plug

Back Rest

Back Rest Actuator Arm

Back Rest Cylinder

Foot Lift Actuator
Arm

Motor

Center Axle
Lubricate using
Molykote G-0052Fg
grease.

Base Axle

Top Frame Axle

OPTIONAL LOCKING CASTERS

(all models)

Locking casters are an option on all models. The locking mechanism can be engaged by using your foot to
depressing the tab located at the rear of each caster. This locks the swivel of the caster and acts as a brake to
minimize movement of the wheel.

ALL FOUR CASTERS MUST BE LOCKED TO ENSURE MINIMAL MOVEMENT

OF THE TABLE.

Casters can be added or removed in the field.

Caster in the mobile position.

Caster in the lock position.

(continued)

Summary of Contents for 85100








Search results

Summary of Contents for 85100

Reviews:

Clinton 85100, Operation, Care & Maintenance, Page: 6 / 8

Search results

Summary of Contents for 85100

Reviews: