Clinton 85100 Operation, Care & Maintenance Download Page 3

CLEANING GUIDELINES

WARRANTY

ADJUSTMENTS

Motor Specifications

Duff Norton Motor

 

(standard on all models)

The Duff Norton Motor is NOT UL listed for either the US or Canada. It IS, however, approved by the "CE" for 
use in Europe.  

120VAC    6 amps    8000N    1.8 min. of constant use out of every 18 min.

Push

Duty Cycle

Duff Norton Motor Power Ratings

120VAC    8 amps    8000N    1 min. of constant use out of every 9 min.

Push

Duty Cycle

SKF Motor Power Ratings

Clinton uses only premium vinyl for upholstery, however, care should be taken when cleaning to ensure that 
the upholstery or color is not affected by the cleaning agent. Use only mild cleaning agents on upholstery. 
Clinton recommends using a 1 to 1 mix of ammonia and water or a 1 to 4 mix of bleach and water, rinse  
thoroughly with clean water and pat surface dry. This is not a guarantee and does not relieve the user from 
responsibility of the proper and safe use of all cleaning agents. Test on inconspicuous area prior to using any 
cleaning agent on upholstery's visible surface. Certain cleaning agents can be harmful to the surface.

Clinton Industries warrants manufactured products to be free of defects in materials, workmanship or design 
under normal use for three years on all mechanical products and one year on all electric equipment, from the 
date of purchase. This warranty does not include damage resulting from accident, abuse or misuse, alteration, 
or negligence of the product and expressly excludes normal wear of parts (including but not limited to vinyl). 
Contact Clinton for full warranty details.

BACKREST 

(models 85200, 85300, & 85309 only)

The backrest can be adjusted from either side of  
the table using the backrest actuator

.

 Rotate the 

actuator towards the backrest to adjust. Always use 
your hand on top of the upholstered top to move 
the backrest up or down. The backrest cylinder is 
pressurized in the up position only and requires 
force to return it to the down position. 

SKF Motor

 

(optional on all models)

The SKF Motor IS UL/CSA listed via cURus listing. It meets all qualifications for both the US and Canada AND 
60601-1 Standards at the component level.

Backrest Actuator

Backrest Cylinder 
Adjusting Nuts

Backrest  
Cylinder

Summary of Contents for 85100









Reviews: