20
Based on Software Version 1.31.1. Content subject to change without notice. Check www.clintonelectronics.com for the most current manual.
Button LED.
This blue ring LED is located on the push-
button of the smaller Connect PVMs only (13” & 21”).
Enable Flashing.
When set to On, the LED will flash
On and Off.
Enable Solid.
When set to On, the LED will not flash,
it will be constant On.
Motion On/Off.
When set to On, the LED will only
turn On (either flash or solid on) when motion is
detected.
Front LED.
This is the yellow LED located on the front
of all Connect PVMs.
Enable Flashing.
When set to On, the LED will flash
On and Off.
Enable Solid.
When set to On, the LED will not flash,
it will be constant On.
Motion On/Off.
When set to On, the LED will only
turn On (either flash or solid on) when motion is
detected.
LED SETTINGS
The LEDs on the front of the device can be turned On/Off in this menu, set to flash, be solid On, or triggered by motion.
*Options available will vary depending on the model of Connect PVM.
Button LED
Front LED
