climecon.fi
© Climecon
3
Installation manual ECOT, controller
Basic start-up guide
1.
Connect the supply voltage to the system, which
activates the touch screen in the main view.
2.
Enter the main menu by pressing the top left corner
of the screen .
3.
Set the language, date and time.
4.
You can change the language by navigating to the
Language section of the Display settings menu.
Return to the previous view by pressing
5.
The date and time can be set in the Date & Time section.
6.
To return to the main view, press the icon with
the three vertical lines in the top left corner.
7.
The temperature can be adjusted with the plus
and minus buttons.
8.
More detailed instructions on the system functions
are provided in a separate manual.
Controller installation:
1.
Lead the controller cable (KLMA) from the terminal
device to the junction box.
2.
Detach the touch screen (1) from the locking piece (2).
3.
Detach the locking piece from the bottom (4) with
a small screwdriver, for example.
4.
Fasten the bottom (4) to the junction box.
5.
Install the cover plate (3).
6.
Install the locking piece (2).
7.
Connect the cables to the touch screen connectors
as shown in Figures 2.1–2.3.
8.
Push the touch screen (1) into the locking piece (2)
until you hear a click.
Components of the ECO controller
1.
Bottom
2.
Cover plate
3.
Locking piece
4.
Touch screen
Figure 4
21
.0
Figure 6
1
2
4
3
